 AquaHydrotech NotroGen Pro
The NitroGEN Pro will treat ponds from 1000 to 10000 gallons (4,545 - 45,450 Litres).
The NitroGEN Pro is installed in the return pipework of the filter circulating system after the UV (if used). Do not place it in the pipework prior to the UV. It is furnished with 43 mm internal diameter plastic pipe connectors.
The NitroGEN will require support. Mount in a vertical position on a flat surface. Ensure there are no loads on the units connections to the pond pipework.
The NitroGEN Pro should be charged with a 240ml pot of the appropriate Nuggets. Each application will provide a minimum of 6 months treatment under normal conditions.
The NitroGEN is installed in the return pipework of the filter circulating system after the UV (if used). Do not place it in the pipework prior to the UV. It is furnished with 43 mm internal diameter plastic pipe connectors. A pair of stepped diameter adapters, which fit standard aquatic pipes. The unit should be fitted with the top screw cap upper most and allowing space for re-charging from above. The NitroGEN does not require mechanical supports on relatively short pipe runs. Ensure there are no loads on the units connections to the pond pipework.
The NitroGEN should be charged with 80mls of the appropriate Nuggets and the remainder refrigerated. Each application will provide a minimum of 6 months treatment under normal conditions. |
