|
|
|
|---|
 A primary Vortex is designed to remove solid waste before it can enter the biological filtration stages, enabling easier maintenance and keeping the filtration unit and media clean.
The size of the vortex a system requires depends upon the amount of water that will be passed through it and the water flow rate. Vortex's are fitted with a 4" (110mm) tangential connection for bottom drain connection fitted as left hand entry as standard.
Primary Vortex units can be easily fitted to match up to other filter units such as "Square Tops" or multibays. |
| Item # | Description | Price | Add to Cart |
|---|
| V500 | V500 2ft Vortex (700mm x 900mm) | £149.00 | Add to Cart | | V1000 | V1000 3ft Reduced Hight Vortex (1020mm x 1130mm) | £219.00 | Add to Cart | | V1800 | V1800 3.ft 6 Inch Vortex (1130mm x 1150mm) | £269.00 | Add to Cart | | V1500 | V1500 3ft Standard Height Vortex (1040mm x 1525mm) | £279.00 | Add to Cart | | V2000 | V2000 4ft Vortex (1320mm x 1800mm) | £419.00 | Add to Cart |
| |
|
|---|
 The square top vortex is an ideal filtration unit for media such as Japanese matting cartridges.
The advantage of this system is that any number of units can be linked together in any configuration ie: straight ot l-shpaed ideally used in conjunction with a primary vortex to create a highly effective filtration system.
They can also be linked together in a reverse flow method eliminating internal pipework or in the traditional way if required. |
| Item # | Description | Price | Add to Cart |
|---|
| STP100 | Square Top Vortex 100 32 Inch square x 41 Inches High (870mm x 1040mm) | £229.00 | Add to Cart | | STP200 | Square Top Vortex 200 42 Inch square x 49.5 Inches High (1070mm x 1255mm) | £329.00 | Add to Cart |
| |
|
|---|
 GM Vortex Filter - Small
Vortex filters are designed to provide reliable, low maintenance pre filtration for ponds. The primary function of Vortex filters is to pre filter all the large waste and debris that would normally accumulate on the bottom of ponds especially Koi ponds. Vortex filters provide the first stage in filtration (mechanical stage) and if installed correctly can filter out as much as 80% of the organic matter that passes through them.
Vortex filters, as mentioned above are primarily used as the first or mechanical stage of any filtration system and therefore should be placed as the first filter at the start of any filtration installation. In standard installations, water from the bottom of the pond is fed direct into the vortex filter by means of a bottom drain or drains, this water is fed together with waste and other debris directly into the vortex chamber via either 4" or 110mm pipe. You will notice from the image, that the inlet pipe to the vortex is offset, as the water enters the vortex the water within the vortex adopts a 'spiral' motion which is a vortes and from where the filter derives it's name.
This 'spiral' motion within the filter causes the waste and debris within the water to settle into the bottom of the vortex chamber where it then collects. This debris will accululate waiting to be 'Flushed' away via the Slide Valve/ball which should be fitted to the external pipework that has been installed as part of your filtration system.
The GM Small Vortex comes in two flavours with both Fixed and Universal outlets:
Fixed Outlet:
The return or outlet is in a fixed position 180° opposite the main inlet.
Universal Outlet:
The return or outlet manifold can be installed to suit the customer’s individual requirements to align with the exact positioning of the next filter bay.
The waste outlet is taken from the base of the cone shaped settlement area and protrudes through the side wall in the base of the vortex, it is from here that all the sediment that has been collected is drained and flushed away. As easy as that!
GM Small Vortex Specifications:
- Sizes: 61cm diameter x 78cm height
- Inlet/Outlet:: 4"
- Waste outlet:: 2
|
| Item # | Description | Price | Add to Cart |
|---|
| GMSVUO | GM Small Vortex Filter - Universal Outlet | £159.00 | Add to Cart | | GMSVFO | GM Small Vortex Filter - Fixed Outlet | £175.00 | Add to Cart | | GMSVLID | GM Small Vortex Lid | £34.00 | Add to Cart |
| |
|
|---|
 GM Vortex Filter - Medium
Vortex filters are designed to provide reliable, low maintenance pre filtration for ponds. The primary function of Vortex filters is to pre filter all the large waste and debris that would normally accumulate on the bottom of ponds especially Koi ponds. Vortex filters provide the first stage in filtration (mechanical stage) and if installed correctly can filter out as much as 80% of the organic matter that passes through them.
Vortex filters, as mentioned above are primarily used as the first or mechanical stage of any filtration system and therefore should be placed as the first filter at the start of any filtration installation. In standard installations, water from the bottom of the pond is fed direct into the vortex filter by means of a bottom drain or drains, this water is fed together with waste and other debris directly into the vortex chamber via either 4" or 110mm pipe. You will notice from the image, that the inlet pipe to the vortex is offset, as the water enters the vortex the water within the vortex adopts a 'spiral' motion which is a vortes and from where the filter derives it's name.
This 'spiral' motion within the filter causes the waste and debris within the water to settle into the bottom of the vortex chamber where it then collects. This debris will accululate waiting to be 'Flushed' away via the Slide Valve/ball which should be fitted to the external pipework that has been installed as part of your filtration system.
The GM Medium Vortex comes in two flavours with both Fixed and Universal outlets:
Fixed Outlet:
The return or outlet is in a fixed position 180° opposite the main inlet.
Universal Outlet:
The return or outlet manifold can be installed to suit the customer’s individual requirements to align with the exact positioning of the next filter bay.
The waste outlet is taken from the base of the cone shaped settlement area and protrudes through the side wall in the base of the vortex, it is from here that all the sediment that has been collected is drained and flushed away. As easy as that!
GM Medium Vortex Specifications:
- Sizes: 70cm diameter x 94cm height
- Inlet/Outlet:: 4"
- Waste outlet:: 2
|
| Item # | Description | Price | Add to Cart |
|---|
| GMMVUO | GM Medium Vortex Filter - Universal Outlet | £189.00 | Add to Cart | | GMMVFO | GM Medium Vortex Filter - Fixed Outlet | £199.00 | Add to Cart | | GMMVLID | GM Medium Vortex Filter Lid | £39.00 | Add to Cart |
| |
|
|---|
 GM Vortex Filter - Large
Vortex filters are designed to provide reliable, low maintenance pre filtration for ponds. The primary function of Vortex filters is to pre filter all the large waste and debris that would normally accumulate on the bottom of ponds especially Koi ponds. Vortex filters provide the first stage in filtration (mechanical stage) and if installed correctly can filter out as much as 80% of the organic matter that passes through them.
Vortex filters, as mentioned above are primarily used as the first or mechanical stage of any filtration system and therefore should be placed as the first filter at the start of any filtration installation. In standard installations, water from the bottom of the pond is fed direct into the vortex filter by means of a bottom drain or drains, this water is fed together with waste and other debris directly into the vortex chamber via either 4" or 110mm pipe. You will notice from the image, that the inlet pipe to the vortex is offset, as the water enters the vortex the water within the vortex adopts a 'spiral' motion which is a vortes and from where the filter derives it's name.
This 'spiral' motion within the filter causes the waste and debris within the water to settle into the bottom of the vortex chamber where it then collects. This debris will accululate waiting to be 'Flushed' away via the Slide Valve/ball which should be fitted to the external pipework that has been installed as part of your filtration system.
The GM Large Vortex comes in two flavours with both Fixed and Universal outlets:
Fixed Outlet:
The return or outlet is in a fixed position 180° opposite the main inlet.
Universal Outlet:
The return or outlet manifold can be installed to suit the customer’s individual requirements to align with the exact positioning of the next filter bay.
The waste outlet is taken from the base of the cone shaped settlement area and protrudes through the side wall in the base of the vortex, it is from here that all the sediment that has been collected is drained and flushed away. As easy as that!
GM Large Vortex Specifications:
- Sizes: 92cm diameter x 140cm height
- Inlet/Outlet:: 4"
- Waste outlet:: 2
|
| Item # | Description | Price | Add to Cart |
|---|
| GMLVUO | GM Large Vortex Filter - Universal Outlet | £429.00 | Add to Cart | | GMLVFO | GM Large Vortex Filter - Fixed Outlet | £439.00 | Add to Cart | | GMLVLID | GM Large Vortex Lid | £47.00 | Add to Cart |
| |
|
|---|
 GM Maxi Vortex Filter
Vortex filters are designed to provide reliable, low maintenance pre filtration for ponds. The primary function of Vortex filters is to pre filter all the large waste and debris that would normally accumulate on the bottom of ponds especially Koi ponds. Vortex filters provide the first stage in filtration (mechanical stage) and if installed correctly can filter out as much as 80% of the organic matter that passes through them.
Vortex filters, as mentioned above are primarily used as the first or mechanical stage of any filtration system and therefore should be placed as the first filter at the start of any filtration installation. In standard installations, water from the bottom of the pond is fed direct into the vortex filter by means of a bottom drain or drains, this water is fed together with waste and other debris directly into the vortex chamber via either 4" or 110mm pipe. You will notice from the image, that the inlet pipe to the vortex is offset, as the water enters the vortex the water within the vortex adopts a 'spiral' motion which is a vortes and from where the filter derives it's name.
This 'spiral' motion within the filter causes the waste and debris within the water to settle into the bottom of the vortex chamber where it then collects. This debris will accululate waiting to be 'Flushed' away via the Slide Valve/ball which should be fitted to the external pipework that has been installed as part of your filtration system.
The GM Maxi Vortex comes in two flavours with both Fixed and Universal outlets:
Fixed Outlet:
The return or outlet is in a fixed position 180° opposite the main inlet.
Universal Outlet:
The return or outlet manifold can be installed to suit the customer’s individual requirements to align with the exact positioning of the next filter bay.
The waste outlet is taken from the base of the cone shaped settlement area and protrudes through the side wall in the base of the vortex, it is from here that all the sediment that has been collected is drained and flushed away. As easy as that!
GM Maxi Vortex Specifications:
- Sizes: 121cm diameter x 147cm height
- Inlet/Outlet:: 4"
- Waste outlet:: 2
|
| Item # | Description | Price | Add to Cart |
|---|
| GMMAXU | GM Maxi Vortex - Universal Outlet | £519.00 | Add to Cart | | GMMAXF | GM Maxi Vortex - Fixed Outlet | £539.00 | Add to Cart |
| |
|
|---|
 SKS TaskMaster Vortex Filter
Vortex filters are designed to provide reliable, low maintenance pre filtration for ponds. The primary function of Vortex filters is to pre filter all the large waste and debris that would normally accumulate on the bottom of ponds especially Koi ponds. Vortex filters provide the first stage in filtration (mechanical stage) and if installed correctly can filter out as much as 80% of the organic matter that passes through them.
Vortex filters, as mentioned above are primarily used as the first or mechanical stage of any filtration system and therefore should be placed as the first filter at the start of any filtration installation. In standard installations, water from the bottom of the pond is fed direct into the vortex filter by means of a bottom drain or drains, this water is fed together with waste and other debris directly into the vortex chamber via either 4" or 110mm pipe. You will notice from the image, that the inlet pipe to the vortex is offset, as the water enters the vortex the water within the vortex adopts a 'spiral' motion which is a vortes and from where the filter derives it's name.
This 'spiral' motion within the filter causes the waste and debris within the water to settle into the bottom of the vortex chamber where it then collects. This debris will accululate waiting to be 'Flushed' away via the Slide Valve/ball which should be fitted to the external pipework that has been installed as part of your filtration system.
SKS TaskMaster Vortex Specifications:
- Size: 30" Diameter x 37" High
|
| Item # | Description | Price | Add to Cart |
|---|
| SKSTMS | SKS TaskMaster Vortex - Small | £209.00 | Add to Cart | | SKSTMSL | Lid for SKS Taskmaster Vortex - Small | £29.00 | Add to Cart | | SKSTML | SKS TaskMaster Vortex - Large | £229.00 | Add to Cart | | SKSTMLL | Lid for SKS Taskmaster Vortex - Large | £29.00 | Add to Cart |
|
|
|---|
 Kockney Koi Vortex Filters
|
|
Estro Sieve Replacem... |
|---|
Estro Sieve
The Estro Sieve is capable of efficient removal of particles from pond water, yet it only takes up a fraction of the space of t...
|
Read more »»»
£209.00 (Buy Now)
|
GM Maxi Vortex - Uni... |
|---|
GM Maxi Vortex Filter Vortex filters are designed to provide reliable, low maintenance pre filtration for ponds. The primary function ...
|
Read more »»»
£519.00 (Buy Now)
|
Aquadyne 2.2B Bead F... |
|---|
Aquadyne 2.2B Bead Filter
The Aqudayne 2.2B is excellently suited to ponds up to 7000 gallons offering support for up to 120lbs (54Kg)...
|
Read more »»»
£1390.00 (Buy Now)
|
Crystal Bio Media 30... |
|---|
Crystal Bio Media
Crystal Bio Media is a unique, eco-friendly glass media. Crystal Bio Media during it's manufacturing process is heated&nb...
|
Read more »»»
£145.00 (Buy Now)
|
GM Small Vortex Filt... |
|---|
GM Vortex Filter - SmallVortex filters are designed to provide reliable, low maintenance pre filtration for ponds. The primary functio...
|
Read more »»»
£175.00 (Buy Now)
|
UltraSieve Midi |
|---|
The UltraSieve Midi
The latest addition to our Sieve filter range is this new and eagerly awaited UltraSieve Midi. Based on the very p...
|
Read more »»»
£475.00 (Buy Now)
|
Contact Information
|
Gorse Hill Bungalow
Gorse Hill Lane
Wellingore
Lincolnshire LN5 0BY
United Kingdom
|
| Phone: |
+44 (0) 1522 811330 |
| Fax: |
+ 44 (0) 1522 811330 |
| Mon-Fri: |
By Appt. |
| Saturday: |
by Appt. |
| Sunday: |
by appt. |
|
