 Sequence 10000S Pump
The entire range of Sequence Pumps through innovative research and design have been developed to deliver substantial flow rates at comparatively low wattages, being very powerful pumps yet economical to run.
The Sequence 10000S pump is designed and built to meet the special needs of ponds, waterscapes and aquaculture. Buying "quality" really pays. Not only do you get years of dependable service, but you enjoy tremendous savings on your electricity bill, every month.
As an example, Sequence 12000S pump, that delivers 12000 litres of water per hour for a total power consumption of just 82 watts, will cost you on average £79.00 per year to run. A pump that is rated at the same 12000 litres per hour and uses 250 watts will cost you £241.00 per year, and a 1000 watt pump will cost you roughly £960.00 per year. That's why the entire range of Sequence Pumps are know as "The Pumps That Pay for themselves"!
As a rough guide, 100 watts of power consumption in the U.K. will cost you approximately 1.1p per hour to run. See what you are spending already on your pump, and see how a sequence pump can make a big difference.
Sequence pumps are the work horses of the industry. They provide tremendous flow rates, with enough pressure (head) to handle the requirements of most systems with the biological filters and moderate water height waterfalls. Sequence Pumps are also used extensively for the transfer and re-circulation requirements of filtration systems, water features, streams, fountains and aquaculture.
Sequence 10000S Product Features:
- Highly efficient, reliable external circulation pump
- High flow rates with low running costs 10000 litres per hour flow rate
- Marinised for use with both fresh and salt water applications
- Optional Strainer Basket available
- 3 year Manufacturers warranty
Another feature of the Sequence pumps is that the entire range are 'marinised', this means that the pumps construction make them compatible for use with Salt Water, swimming pools and fresh water applications. A superb quality, versatile, and economical pump.
Sequence 10000S Strainer Baskets
 If you are not pumping filter cleaned water, you will need a strainer basket (left) for your Sequence pump. The basket simply screws onto the inlet of the pump.
These baskets come in two sizes one for the Sequence 8000S - Sequence 12000S, and one for the Sequence 15000S and Sequence 18000S models.
|
Sequence 10000S Specifications
|
| Flow Rate (Litres): |
10,000 lph |
| Flow Rate Gallons: |
2,200 gph |
| Wattage: |
72 - 87 watts |
| Inlet: |
2" inlet |
| Outlet: |
1.5" Outlet |
| Strainer Basket Req'd: |
8000S - 12000S |
| Warranty: |
3 Years |
|
